Submersible pump for use with Stoddard (or similar) solvent and deodorized kerosene submerged parts washer applications only. For pumping unheated metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and Oil Equipment Directory. These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point not lower than 38°C.
- 1/150 HP oil-filled motor
- Cast aluminum housing
- Nylon volute
- Viton® shaft seal
- Polyethylene screen
- 1" conduit fitting (25.4 mm)
- IP 68 - Fully Submersible
|Max litres per hour||780|
|Max litres per minute||13.0|
|Voltage / hertz||230 / 50|
|Motor type||Oil filled|
|Continuous duty rated||Yes|
|Shaft material||Stainless steel|
|Housing material||Cast aluminium|
|Shut off (Max head)||1.9m|
|Discharge thread||¼" NPT|
|Size: L x W x H - mm||105 x 105 x 108|
|Additional information||Click Here|
|Flow rates at different pumping heights - litres per hour|
|Model||@ .3m||@ .9m||@ 1.5m||Head / Shut Off**|
|**Head / shut off - The higher the water is pumped, the less the flow until the maximum pumping height is reached. It is critical that this is understood, this height is where the water stops flowing.|
To replace faulty pumps in parts washers.
What we liked:
Little Giant make the best specialty pumps for these kinds of jobs.
Less than ideal:
Nothing at all, Little Giant are market leaders.