Products Information Cart

Household Pumps

A huge range of pumps for household, commercial, agricultural and industrial use

Floating Fountains & Dam Aerators

Floating Fountains and Aerators for Dams, Lakes and Large Ponds

Pond Help & Information

Need a hand working out the right gear for your project? Browse our range of help pages or submit a help request directly to our specialists.

Pond One ClariTec Pressure Filters

The Pondone Claritec range of pressure filters are great value for money and highly effective when sized correctly using our handy guide or chatting to one of our salespeople.

  • Three functions - Biological, Mechanical & UV-C
  • UVC keeps water from turning green by killing microsopic floating algae
  • Biological filtration component creates an environment that good bacteria can grow to reduce ammonia and other toxins in your pond
  • Mechanical filtration (sponges) removes sediment and dead organic matter from
  • Back wash system (Flushes out bottom of the cannister only, not sponges)
  • 3 year warranty
  • Full range of spare parts available
  • Note this is not a pump, only a filter and must be matched with an appropriate sized filter pump that sits in the pond (see diagrams below).
  • Replacement Bio-Media available - click here

Aussie's Observations about  ClariTec Pressure Filters

Budget • Good • Better • Best • Superior

Any pond where filtered water is required. In particular when water is to be pumped to a higher level such as a waterfall or feature. 

Every model has a back wash system that is very easy to use. UV lamp "on" indicator. Great value for money.

The backwash only cleans the bottom of the canister, not the foams. Other brands that do clean the foams are Laguna, Fishmate & Oase. Pressure filters are not great for Koi. We recommend a gravity filter when Koi or turtles are present.

Product Price Filter TypeIdeal Flowlitres per hourMin Flowlitres per hourMax Flow L/Hourlitres per hourPond Max Vol (No Fish)litresPond Max Vol (With Fish)litresDimensionsL x W x H (mm)Back Wash SystemUVC FittedUltra violet lamp fitted as standardWarranty YearsCleaning IndicatorCanister Above GroundIf canister buried, how much shows above ground?Foam FiltersBio BallsFor micro-organism growthPower Cord LengthHose Tails SuppliedHose Tails OptionalMax Pump Pressure
Pond One ClariTec 15000 Pressure Filter Pressure Filter
$359.00
Pressure5,0005,0006,000390 x 660 mmyes13 watt3 yrsyes120mmYesYes10m32 or 38mm5m
Pond One ClariTec 10000 Pressure Filter Pressure Filter
$329.00
Pressure4,0003,0005,500390 x 560 mmyes13 watt3 yrsyes120mmYesyes10m32 or 38mm5m
Pond One ClariTec 5000 Pressure Filter Pressure Filter
$299.00
Pressure2,4001,5003,300290 x 470 mmyes9 watt3 yrsyes120mm5yes10m32 or 38mm5m
Pond One ClariTec 3000 Pressure Filter Pressure Filter
$259.00
Pressure1,2508502,000290 x 360 mmYes9 wattt3yrsyes120 mmYesYes10 m32 or 38mm5m

Filter Selection Help

To choose the ideal filter for any pond you must first know the correct environmental flow to maintain ideal water quality for your pond. (Please remember that the pond size alone does not determine the filter or pump size without first taking into account the many environmental and physical factors) 

3 ways to get help to establish flow

  1. Fill in one of our e-mail help forms and let us do all the calculations for you
  2. Give us a call 1800 607 388 for our advice
  3. Do it yourself and use our quick reference flow calculator for rough estimate.

Step One: Establish the required flow through the filter keeping in mind waterfall** height if any, or long hose**
Step Two: Choose a filter from the chart below (Example if your pond requires a flow through the filter of 2,500 litres per hour, the Claritec 5000 would give the best result)
Step Three: Choose a pump, they are listed below in order of quality and suitability

 

Recommended flow through these filters L/H

Creative Pumps recommendations

3000

5000

10000

15000

Minimum Flow

850

1,500

3,000

5,000

Ideal Flow - See hint below

1,250

2,400

4,000

5,000

Maximum Flow - See hint below

2,000

3,300

5,500

6,000

Manufacturers suggested maximum flow (*Please do not use this much flow through the filter, as it is way too much for Australian conditions)
 

3,000*

5,000*

10,000*

15,000*

Hint: Within reason the slower the water passes over the UV lamp and through the filter the better the result. However, you can never have too much pond flow, so, by having a slightly oversize pump and releasing water directly back into the pond or on to a feature or waterfall through a "Tee" with a valve (tap), added circulation is provided for the pond.

Suitable Pumps

  3000 5000 10000 15000

Most suitable pumps
Assuming a waterfall is not over 500mm high or the correct size hose is not longer than 3m

Laguna Maxflo 2200

Tornado Multi 3000

Laguna Maxflo 2200

Oase Aquamax 3500

Tornado Multi 4500

Laguna Maxflo 5000

Oase Aquamax 5500

Tornado Multi 6000

Laguna Maxflo 7500

Oase Aquamax 5500

Tornado Multi 6000

What makes a pump that is specifically designed for sending water to a filter (such as the pumps above) superior to a multi purpose pump such as Pondmate 
1) The cage design is turtle shell shaped to attract solids from 360 degrees
2) These pumps are designed to run 24/7 year after year
3) They have a vortex impeller capable of handling solids without blocking

Other workable pumps

Laguna Maxflo 4000**

Laguna - Maxflo 4000**

Laguna Maxflo 9000##

Laguna Maxflo 11000##

Laguna Maxflo 9000##

Oase Aquamax 8500##

**Special note, if using a waterfall or a long hose between pump and filter the pump will need to be larger to allow for the reduced flow caused by the head (pumping height, and/or hose length) If in doubt fill in one of our e-mail help forms and let us do all the calculations for you.
# A little under size for some pond sizes, but would work if the pond were smaller than the filters maximum volume rating.
## This pump is a little too strong, unless a waterfall over 1m is in place. However, you can never have too much pond flow, so, by releasing water back into the pond through a "Tee" and flow valve added circulation is provided for the pond.

 

Aussie's additional thoughts

Tip 1:  When calculating flow, always allow about a 15% flow loss when a pressure filter is used.
Tip 2:  Place the pump at the opposite end of the pond to the water return, and in the deepest part of the pond.
Tip 3:  Blagdon Interpet offer a powder to prime filter systems, a great way to hasten biological activity. Blagdon Interpet Bio start.
Tip 4:  Within reason the slower the water passes over the UV lamp and through the filter the better the result. However, you can never have too much pond flow, so, by having a slightly oversize pump and releasing water directly back into the pond or on to a feature or waterfall through a "Tee" with a valve (tap), added circulation is provided for the pond.
Tip 5:  Pump - maximum pumping head. The pump supplying the filter must not have a pumping head exceeding 4m (0.4 bar)  Head over 4m could damage the filter and could even burst the container. On the other hand a pump with inadequate head may not provide enough flow through the filter 
In a nut shell ....The height difference between the filter lid and a pressure free outlet must not exceed 4metres (0.4 bar). So if the filter was mounted 1m above the pond surface, the pump must not have a maximum pumping height in excess of 5m. Or if mounted 2m above the surface of the pond, the pump must not have a maximum pumping height in excess of 6m. 
There is however another factor in head calculations if long hose lengths are used, see "Friction loss in hose" under How to calculate your friction loss if your hose will be more than 3m.

 

Filter Pond Size Chart

The figures below are only intended as a guide, many factors come into account when choosing both the perfect pump and filter. They include sun, pond depth, size of pond, hose size and length, waterfall height and of course fish stocking.

Pond size selection 3000 5000 10000 15000

No fish* Pond size - litres

3,000 5000 10,000 15,000

Some fish** Pond size - litres

1,800 3,000 6,000 9,000

Medium fish*** Pond size - litres

1,200 2,000 4,000 6,000

Lots fish**** Pond size - litres

800 1,250 2,500 3,750

Koi/Turtles***** Pond size - litres

300 700 1,400 2,100

*No fish - Near natural garden ponds in shade, at least 70cm deep with plant zones, without fish.
**Some fish - Near natural garden pond with plants and fish stock of 40cm per 1,000 litres 
***Medium fish - Near natural garden pond with plants and fish stock of up to 60cm per 1,000 litres
****Lots fish - Near natural garden pond with plants and fish stock of up to 80cm per 1,000 litres
***** Koi and Turtles - Pressure filters are not ideal for Koi or turtles due to the extreme amount of waste they create and have trouble processing the waste due to their design , therefore, gravity filters are better suited. 
However, due to their size and fact that gravity filters must be mounted at the top of a waterfall or above pond level, there may be no other choice. In this case use a pressure filter but we suggest that the pump and filter be a little oversize maintain water quality.
For Australian conditions... The above figures have been adjusted by us for Australian conditions, please do not be confused by anyone else's calculations that may be for the European market as they are different because of our climate