Home   |   About Us   |   Contact Us   |   Trade Prices   |   Delivery   |   View Checkout   |   
Creative Pumps Thawte Logo
bottom-footer

aquagarden logoAqua Garden Barracuda pumps
Filtration and waterfall pumps
Submersible or In-line pumps - Fresh water 4,000 to 15,000 lph

Pumps for ....
Water Features, Fountains, Waterfalls, Marine Aquariums, Industrial etc.

Aquagarden Barracuda Pond filter pumps
  • ldeal for use in polluted water up to a 6 mm particle size
  • Ceramic bearings for continuous use
  • Vortex impellor
  • All the electrical parts are embedded in a block of plastic resin
  • Overload protection by means of a thermal overload trip
  • Simple maintenance with removable rotor assembly
  • Novel and elegant appearance, Optimum filtration

Aussie says Better - This is our rating for this product

Aussie's observations

Suitable for: Water features, also for pond circulation, waterfalls, fountains streams, pond filters
What was liked: There is both 1 " BSP male threads on the inlet and outlets. The 3 year warranty on the pump and 2 year on the impeller. The quality and features are excellent for the price point, very good value for money.
Best of all the reliability for the price has been excellent. This pump sits at the top end of pumps made in China.
Less than ideal: Nothing for the price point.
Other pumps of this type: Pondmate DWP Laguna Maxflo
Made in China
3 year warranty
Barracuda
4000
Barracuda
6000
Barracuda
10000
Barracuda
15000
Max Litres per hour 4,000 6,000 10,000 15,000
Head - or zero flow height** 2.4m** 2.6m** 4.5m** 5.5m**
Flow rate at different heads Chart below Chart below Chart below Chart below
Power usage - watts 45 65 135 210
Power cost^ - See below comments $118/ 24 hours $171/ 24 hours $355/ 24 hours $551/ 24 hours
Length, width, height Cm 32 x 14 x 17 32 x 14 x 17 32 x 14 x 17 38 x 17 x 19
Voltage 240 volts 240 volts 240 volts 240 volts
Vortex impeller - for solids yes yes yes yes
Flow adjustment on pump no no no no
Cord length 10m 10m 10m 10m
Salt water use No No No No
Shaft material Ceramic Ceramic Ceramic Ceramic
Thermal shut off (automatic) Yes Yes Yes Yes
Outlet (delivery) thread 1 " BSP
male
1 " BSP
male
1 " BSP
male
1 " BSP
male
Inlet (suction) thread if used as an in-line pump 1 " BSP
male
1 " BSP
male
1 " BSP
male
1 " BSP
male
Removable pre-filter no no no no
Optional foam block filter no no no no
National warranty - Australia wide (for more details)- 3 years / 2 year impeller 3/2 year 3/2 year 3/2 year 3/2 year
Price - Aus $ Including GST $269
Barracuda
4,000
$295
Barracuda
6,000
$349
Barracuda
10,000
$429
Barracuda
15,000

**Head / shut off - The higher the water is pumped, the less the flow until the maximum pumping height is reached. It is critical that this is understood, this height is where the water stops flowing.
^Based on power cost of 30.0 cents per KWH
 
border

border

border
border

click price tab          View cart
Total shipping per order Only $10 to any Australian Address - Prices Include GST
Trade customers - Buying for resale - Call 1800 607 388 or click > Trade contact

border
border

border

border
 
Confused about selecting the right pump?

Flow rates at different pumping heights - litres per hour

Model @ 0cm @1.0m @1.5m @2.0m @3.0m @4.0m @5.0m @6.0m Head / Shut Off**
4000 3,600 2,800 2,300 1,200 0 - - - 2.4 m
6000 6,000 5,300 4,400 2,800 0 - - - 2.6 m
10000 10,000 9,200 8,700 7,800 5,100 500 0 - 4.5 m
15000 15,000 14,700 14,200 13,600 11,700 8,300 3,200 0 5.5 m

**Head / shut off - The higher the water is pumped, the less the flow until the maximum pumping height is reached. It is critical that this is understood, this height is where the water stops flowing.