These strainers are designed to be installed on the inlet or suction line of Flojet pumps in order to filter the liquid coming through to stop anything from blocking, damaging or accelerating wear on the pump.
Use the table below to work out which size and o'ring material you require then select the model from the list to the side of the page, choose the quantity required and then add to cart.
Description | |
Inline Suction Strainers (hose barbs) | |
Model No. 01740-000 Inline suction strainer 20mm hose barb, polypropylene base, polysulfone clear cover, stainless steel 40 mesh screen, Buna-N FDA O-Ring. Two lugs for secure mounting. Suits potable water. |
|
Model No. 01740-002 (01740-102) Inline suction strainer 12.5mm hose barb, polypropylene base, polysulfone clear cover, stainless steel 40 mesh screen, Buna-N FDA O-Ring. Two lugs for secure mounting. Suits potable water. |
|
Inline Suction Strainers (3/8" NPT threads) | |
Model No. 01740-375 Inline suction strainer 3/8" female NPT ports, polypropylene base, polysulfone clear cover, stainless steel 40 mesh screen, Buna-N FDA O-Ring. Two lugs for secure mounting. Suits potable water. |
|
Quad Port Suction Strainers (Snap in ports) | |
Model No. 1740-012 12.5mm hose barb x quad snap-in port 90°, polypropylene base, polysulfone clear cover, Buna-N FDA O-Rings on cap, EPDM O-Ring on quad port, stainless steel 40 mesh screen, fits direct to pumps with quad ports. Suits potable water. |
|
Model No. 01740-010 20mm hose barb x quad snap-in port 90°, polypropylene base, polysulfone clear cover, Buna-N FDA O-Rings on cap, EPDM O-Ring on quad port, stainless steel 40 mesh screen, fits direct to pumps with quad ports. Suits potable water. |
|
Model No. 01745-010 20mm hose barb x quad snap-in port 90°, polypropylene base, PETG clear cover, Viton O-Rings, stainless steel 40 mesh screen. Improved chemical resistance, max temp 70°C, fits direct to pumps with quad ports. Not for potable water. |